- Specifications
- Documentation
- Software
- Drivers
Product | Aufero Laser 1 |
---|---|
Motherboard | OLM-PRO-V1.2 Motherboard,32Bits ESP32MCU |
Firmware | OLF-V180 series Firmware |
Safety Features | 1. Active Position Protection 2. Exposure Duration Detection and Limitation 3. Laser Beam Safety Guard 4. 24V Power Delivery System 5. Power control system, if shutdown the machine, it would cut the power. |
Frame Materials | Aluminum Profile + Acrylic |
Motors | NEMA 17 Stepper Motors |
Mechanical Precision | Y:12.5um, X:12.5um |
Pixel Accuracy | Adjustable (Default: 300 pixels per inch, about 0.81um Pixel Accuracy) |
Engraving Area | 180mm×180mm |
Available Laser Modules | LU2-2 Laser Module
(Real Luminous Power: 1,000-1,600mw) LU2-4-SF Short Focus Laser Module (Real Luminous Power: 4,500-5,500mw) LU2-4-LF Long Focus Laser Module (Real Luminous Power: 4,500-5,500mw) Every 50 hours of use, please clean the lens with a medical cotton swab and alcohol. |
Wave Length | 445±5nm |
Focus | Fixed Focus |
Default Focal Length | 50mm (from the heat sink to the object) |
Control Mode | PWM |
Power Rate | S0-S1,000 |
Engraving Speed | 0-5,000mm/min |
Baud Rate | 115200 – 921600 (Default: 115200) |
Computer OS | Win XP, Win 7, Win 8, Win 10 (LaserGRBL) Mac and Linux (LightBurn) |
Control Softwares | LaserGRBL (free), LightBurn (Paid Software) |
Input Format | JPG, JPEG, PNG, BMP, SVG, etc. |
Available Materials of Engraving | Food, MDF, Paperboard, Black Acrylic, Leather, Stainless Steel, Power Coated Metal, Stone, etc. |
Available Materials of Cutting | Plywood, Pine Board, Paperboard, Black Acrylic, Leather, Felt Cloth, etc. |
Input Voltage | 110V-220V (Compatible) |
Power Adapter Output | 24V/2A |
Operating Temp | -20℃-50℃ |
Product | Aufero Laser 1 |
---|---|
User Manual | Aufero Laser 1 |
Laser Explorer APP Manual | Laser Explorer APP Manual |
Material Reference | Laser GRBL Lightburn |
Product | Aufero Laser 1 |
---|---|
LaserGrbl | LaserGrbl (PC – Free. Please user 4.9.x or higher) |
LightBurn | LightBurn (PC/MAC – 30 Day Free Trial) |
Aufero Laser 1 and
Drivers
Aufero Laser 1 uses standard Serial com port driverless communication.This means
in most operating systems, Windows 10, MacOs, Linux, theres no need to install any drivers.
This
means in most operating systems, Windows 10, MacOs, Linux, theres no need to install any
drivers.
However in some circunstances, specially on Operating systems already End of Life
(EoL) the drivers are not installed via Windows Updates. This is particularly true on Windows XP,
Windows 7 and Some versions of WIndows 8
In this circunstances an Error will apear in the Device manager as below
In this cases some special
instructions are required to Force install the USB Serial CDC Drivers.
Please follow the steps
below Step by Step:
PDF INSTRUCTIONS – CDC USB
Drivers